1. Home
  2. Blog
  3. Releases

Apache Spark Streaming example project released

We are pleased to announce the release of our new Apache Spark Streaming Example Project!

This is a simple time series analysis stream processing job written in Scala for the Spark Streaming cluster computing platform, processing JSON events from Amazon Kinesis and writing aggregates to Amazon DynamoDB.

data flow png

The Snowplow Apache Spark Streaming Example Project can help you jumpstart your own real-time event processing pipeline. We will take you through the steps to get this simple analytics-on-write job setup and processing your Kinesis event stream.

Read on after the fold for:

  1. What are Spark Streaming and Kinesis?
  2. Introducing analytics-on-write
  3. Detailed setup
  4. Troubleshooting
  5. Further reading

Apache Spark Streaming enables scalable, high-throughput, fault-tolerant stream processing of live data streams, using a “micro-batch” architecture. Our event stream will be ingested from Kinesis by our Scala application written for and deployed onto Spark Streaming.

Amazon Kinesis is a fully managed service for real-time processing of streaming data at massive scale. In this project we leverage the new Kinesis receiver that has been recently developed for Spark Streaming, leveraging the Kinesis Client Library.

Our Spark Streaming job reads a Kinesis stream containing events in a JSON format:

{ "timestamp": "2015-06-05T12:54:43.064528", "type": "Green", "id": "4ec80fb1-0963-4e35-8f54-ce760499d974" }

Our job counts the events by type and aggregates these counts into 1 minute buckets. The job then takes these aggregates and saves them into a table in DynamoDB:

data table png

The most complete open-source example of an analytics-on-write implementation is Ian Meyers’ amazon-kinesis-aggregators project; our example project is in turn heavily influenced by the concepts in Ian’s work. Two important concepts to understand in analytics-on-write are:

  1. Downsampling: where we reduce the event’s ISO 8601 timestamp down to minute precision, so for instance “2015-06-05T12:54:43.064528” becomes “2015-06-05T12:54:00.000000”. This downsampling gives us a fast way of bucketing or aggregating events via this downsampled key
  2. Bucketing: an aggregation technique that builds buckets, where each bucket is associated with a downstampled timestamp key and an event type criterion. By the end of the aggregation process, we’ll end up with a list of buckets – each one with a countable set of events that “belong” to it.

In this tutorial, we’ll walk through the process of getting up and running with Amazon Kinesis and Apache Spark Streaming. You will need git, Vagrant and VirtualBox installed locally. This project is specifically configured to run in AWS region “us-east-1” to ensure all AWS services are available. Building Spark on a Vagrant box requires at least 8GB of RAM and 64 bit OS hosting vagrant.

Step 1: Build the project

In your local terminal:

 host$ git clone https://github.com/snowplow/spark-streaming-example-project host$ cd spark-streaming-example-project host$ vagrant up && vagrant ssh

Let’s now build the project. This should take around 10 minutes with these commands:

guest$ cd /vagrant guest$ inv build_project

Step 2: Add AWS credentials to the vagrant box

You’re going to need IAM-based credentials for AWS. Get your keys and type in “aws configure” in the Vagrant box (the guest). In the below, I’m also setting the region to “us-east-1” and output format to “json”:

$ aws configure AWS Access Key ID [None]: ADD_YOUR_ACCESS_KEY_HERE AWS Secret Access Key [None]: ADD_YOUR_SECRET_KEY_HERE Default region name [None]: us-east-1 Default output format [None]: json

Step 3: Create your Kinesis stream

We’re going to set up the Kinesis stream. Your first step is to create a stream and verify that it was successful. Use the following command to create a stream named “my-stream”:

$ inv create_kinesis_stream default my-stream

If you check the stream and it returns with status CREATING, it means that the Kinesis stream is not quite ready to use. Check again in a few moments, and you should see output similar to the below:

$ inv describe_kinesis_stream default my-stream { "StreamDescription": { "StreamStatus": "ACTIVE", "StreamName": "my-stream", "StreamARN": "arn:aws:kinesis:us-east-1:3197435995:stream/my-stream", "Shards": [ { "ShardId": "shardId-000000000000", "HashKeyRange": { "EndingHashKey": "340282366920938463463374607431768211455", "StartingHas
hKey": "0" }, "SequenceNumberRange": { "StartingSequenceNumber": "49551350243544458458477304430170758137221526998466166786" } } ] } }

Step 4: Create a DynamoDB table for storing our aggregates

I’m using “my-table” as the table name. Invoke the creation of the table with:

$ inv create_dynamodb_table default us-east-1 my-table

Step 5: Generate events in your Kinesis Stream

Once the Kinesis’ stream’s “StreamStatus” is ACTIVE, you can start sending events to the stream by:

$ inv generate_events default us-east-1 my-stream Event sent to Kinesis: {"timestamp": "2015-06-05T12:54:43.064528", "type": "Green", "id": "4ec80fb1-0963-4e35-8f54-ce760499d974"} Event sent to Kinesis: {"timestamp": "2015-06-05T12:54:43.757797", "type": "Red", "id": "eb84b0d1-f793-4213-8a65-2fb09eab8c5c"} Event sent to Kinesis: {"timestamp": "2015-06-05T12:54:44.295972", "type": "Yellow", "id": "4654bdc8-86d4-44a3-9920-fee7939e2582"} ...

Step 6: Build Spark Streaming with Kinesis support

Now we need to build a version of Spark with Amazon Kinesis support.

Spark now comes packaged with a self-contained Maven installation to ease building and deployment of Spark from source located under the build/ directory. This script will automatically download and setup all necessary build requirements (Maven, Scala, and Zinc) locally within the build/ directory itself. It honors any mvn binary if present already, however, will pull down its own copy of Scala and Zinc regardless to ensure proper version requirements are met.

We can issue the invoke command to build Spark with Kinesis support; be aware that this could take over an hour:

vagrant@spark-streaming-example-project:/vagrant/spark-master$  inv build_spark ... [INFO] Spark Kinesis Integration ......................... SUCCESS [1:11.115s] ... [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESS [INFO] ------------------------------------------------------------------------ [INFO] Total time: 1:29:00.686s [INFO] Finished at: Sun Jun 07 00:32:09 UTC 2015 [INFO] Final Memory: 94M/665M [INFO] ------------------------------------------------------------------------

Step 7: Submit your application to Spark

Open a new terminal window and log into the Vagrant box with:

 host$ vagrant ssh

Now start Apache Spark Streaming system with this command:

guest$ inv run_project config/config.hocon.sample ...

If you have updated any of the configuration options above (e.g. stream name or region), then you will have to update the config.hocon.sample file accordingly.

Under the covers, we’re submitting the compiled spark-streaming-example-project jar to run on Spark using the spark-submit tool:

$ ./spark/bin/spark-submit  --class com.snowplowanalytics.spark.streaming.StreamingCountsApp  --master local[4]  ./target/scala-2.10/spark-streaming-example-project-0.1.0.jar  --config ./config/config.hocon.sample

Step 8: Monitor your job

First review the spooling output of the run_project command above – it’s very verbose, but if you don’t see any Java stack traces in there, then Spark Streaming should be running okay.

Now head over to your host machine’s localhost:4040 and you should see something like this:

sparkUI png

Step 9: Inspect the “my-table” aggregate table in DynamoDB

Success! You can now see data being written to the table in DynamoDB. Make sure you are in the correct AWS region, then click on my-table and hit the Explore Table button:

data table png

For each BucketStart and EventType pair, we see a Count, plus some CreatedAt and UpdatedAt metadata for debugging purposes. Our bucket size is 1 minute, and we have 5 discrete event types, hence the matrix of rows that we see.

Step 10: Shut everything down

Remember to shut off:

  • Python data loading script
  • Control C to shutdown Spark
  • Delete your my-stream Kinesis stream
  • Delete your my-table DynamoDB table
  • Delete your StreamingCountingApp DynamoDB table (created automatically by the Kinesis Client Library)
  • Exit your Vagrant guest
  • vagrant halt
  • vagrant destroy

This is a short list of our most frequently asked questions.

I got an out of memory error when trying to build Apache Spark:

  • Answer – Try setting memory requirements of Maven with:
$ export MAVEN_OPTS="-Xmx2g -XX:MaxPermSize=512M -XX:ReservedCodeCacheSize=512m"

I found an issue with the project:

Spark is an increasing focus for us at Snowplow. Recently, we detailed our First experiments with Apache Spark. Also, catch up on our newly released version 0.3.0 of our spark-example-project.

Separately, we are also now starting a port of this example project to AWS Lambda – you can follow our progress in the aws-lambda-example-project repo.

This example project is a very simple example of an event processing technique which is called analytics-on-write. We are planning on exploring these techniques further in a new project, called Icebucket. Stay tuned for more on this!

More about
the author

Snowplow Team
View author

Ready to start creating rich, first-party data?

Image of the Snowplow app UI